Change DNS on Deco (TP-Link)

This guide will show you how to change DNS on Deco router. Reference this TP-Link Deco router setup instructions for more information.

Because this is router is app-based only, you will not be able to access the router IP directly. Please make sure that the mobile device you are using is connected to the Deco network before proceeding.

Step 1: Navigate to DNS Section

Open the Deco app on your mobile application. Select the More option from the bottom menu.

Click on the Advanced option on the screen, and select IPv4.

CleanBrowsing – Deco App – Locate DNS

Step 2: Change DNS on Deco Router

This will drop you into the WAN settings. From there, select the Internet Connection Type option.

Toggle the Obtain DNS Automatically to OFF so that you can set your preferred DNS.

CleanBrowsing – Deco DNS Manual Entries

Select Save when done.

Final Step: Verify Configuration

We prepared an article that will help you navigate the process of confirming things are functioning as expected.

Was this article helpful?

Related Articles

Leave A Comment?