These instructions will provide guidance on how to configure CleanBrowsing on Actiontex Q1000. It uses generic instructions based on when the router was last configured.
The CleanBrowsing Family IP's are:
Primary: 185.228.168.168
Secondary: 185.228.169.168
Note: If you have a paid plan use the DNS IPs provided in your account.Step 1: Access the router
Log into your router’s browser-based utility by entering 192.168.0.1 or your default configuration IP into a browser.
Step 2: Navigate to Advanced Setup menu
Click on the Advanced Setup option.
Step 3: Navigate to WAN Settings
Click WAN Settings from the Broadband Settings /IP Addressing section.
Step 4: Change your DNS type.
The options may differ depending on your firmware. Scroll down to 4. Set the DNS Type then select Static DNS.
The CleanBrowsing Family IP’s are:
- 185.228.169.168
- 185.228.168.168
Note: If you have a paid plan use the DNS IPs provided in your account.
Enter the CleanBrowsing IP’s into the First and Second DNS resolver address entries appropriately.
Click Apply to save your settings
Final Step: Verify Configuration
We prepared an article that will help you navigate the process of confirming things are functioning as expected.
Leave A Comment?